Betonline Card Catcher

BetOnline Card Catcher Manual

You are here:
< Back

BetOnline Card Catcher Online Manual

BetOnline Card Catcher Online Manual


Please note there’s also a video tutorial of this online manual inside the BetOnline Card Catcher application. Just click on Watch Tutorial.

 

 

Initial Setup (Section 1)

 

 

 

Initial Setup (Section 1)

1. On first load of the BetOnline Card Catcher, you’ll be asked to pick your database. The BetOnline Card Catcher only supports Holdem Manager 2 & 3, and PokerTracker 4 for HUD Support. It will catch hands in real time for importing into Holdem Manager 1 and PokerTracker 3, but will not launch a HUD.

2. BetOnline Card Catcher will auto setup your import directories for you. Once it’s setup you’ll receive the below message. However, it’s important to double check your settings in your poker database to ensure that your database is importing from the correct directory (see section 2 for PokerTracker 4, section 3 for Holdem Manager 2, or section 4 for Holdem Manager 3).

betonline.ag poker

Go back to the top

PokerTracker 4 Setup (Section 2)

 

 

 

PokerTracker 4 Setup (Section 2)

1. In PokerTracker 4, check your auto import directory setup by clicking on CONFIGURE from your top menu options. Then click on SITE & IMPORT OPTIONS. Under Poker Network on the left hand side, select Chico. Make sure that Get Hands while playing on site is CHECKED. Under Directories Configuration, make sure that the BetOnline Card Catcher directory is listed. If you used the default installation directory it will be: C:\Program Files (x86)\Ace Poker Solutions\BetOnline Card Catcher\ChicoHandHistories. If it’s not there, then click the ADD button, and add: C:\Program Files (x86)\Ace Poker Solutions\BetOnline Card Catcher\ChicoHandHistories. Make sure AUTO CENTER under client options is unchecked as well. Click OK and close the Import Configuration screen.

 

2. Set up the correct database and format. On BetOnline Card Catcher, click on Settings.

 

3. On the Settings window, Click on Change.

 

4. Select the Correct database, PT4.

Select the correct format. For PT4, the correct format is Chico.

Note that Chico format is selected as the default format for new users – it supports more poker features like Run It Twice, straddle, etc; IPoker format does NOT support Run It Twice.

5. Load up BetOnline / Bodog Poker client and log into your account.

6. Once the import folder is properly setup, make sure that the BetOnline Card Catcher says STOP CATCHING (this means it’s grabbing hands from Betonline / Chico network and creating hand histories) on the main interface. If it doesn’t for any reason, then click START CATCHING on the BetOnline Card Catcher.

BetOnline poker

 

7. Lastly, from PokerTraker 4 click on PLAY POKER, and GET HANDS WHILE PLAYING.

PokerTracker 4

 

8. Load up some tables and start playing. The HUD will take a hand or two to load from PokerTracker and then the HUD will appear on the tables.

Go back to the top

Holdem Manager 2 Setup (Section 3)

 

 

 

Holdem Manager 2 Setup (Section 3)

1. In Holdem Manager 2, click on SITE SETUP. On the left hand side of the Site Settings pop-up click on Asian Poker Clubs. Under AUTO IMPORT FOLDERS, check to see that the BetOnline Card Catcher directory is listed. If you used the default install locations the folder will show as: C:\Program Files (x86)\Ace Poker Solutions\BetOnline Card Catcher\ChicoHandHistories. If it’s not listed, then click on the green + sign, and under folder, add: C:\Program Files (x86)\Ace Poker Solutions\BetOnline Card Catcher\ChicoHandHistories. Click OK. Click on Close to the Site Settings screen.

 

2. Set up the correct database and format. On BetOnline Card Catcher, click on Settings.

 

3. On the Settings window, Click on Change.

 

4. Select the Correct database, HM2.

Select the correct format. For HM2, the correct format is Asian Poker Clubs.

Note that Chico format is selected as the default format for new users – it supports more poker features like Run It Twice, straddle, etc; IPoker format does NOT support Run It Twice.

 

5. Load up BetOnline / Bodog Poker client and log into your account.

6. Once the import folder is properly setup, make sure that the BetOnline Card Catcher says STOP CATCHING (this means it’s grabbing hands from Betonline / Chico network and creating hand histories) on the main interface. If it doesn’t for any reason, then click START CATCHING on the BetOnline Card Catcher.

BetOnline poker

 

That’s it. You may need to click on STOP HUD and START HUD in the holdem manager ACTIVE SESSION screen, but you shouldn’t have to manually attach the table.

Go back to the top

Holdem Manager 3 Setup (Section 4)

 

 

 

Holdem Manager 3 Setup (Section 4)

1. In Holdem Manager 3, click on TOOLS > SITE SETTINGS. On the left-hand side of the Site Settings pop-up click on Add More Sites. Under More Sites, check Chico. Then Click on Update Sites. Under AUTO IMPORT FOLDERS, check to see that the BetOnline Card Catcher directory is listed. If you used the default install locations the folder will show as: C:\Program Files (x86)\Ace Poker Solutions\BetOnline Card Catcher\ChicoHandHistories. If it’s not listed, then click on the ADD button, and under folder, add: C:\Program Files (x86)\Ace Poker Solutions\BetOnline Card Catcher\ChicoHandHistories. Click OK. Click on OK to the Site Settings screen.

 

2. Set up the correct database and format. On BetOnline Card Catcher, click on Settings.

 

3. On the Settings window, Click on Change.

 

4. Select the Correct database, HM3.

Select the correct format. For HM3, the correct format is Chico.

Note that Chico format is selected as the default format for new users – it supports more poker features like Run It Twice, straddle, etc; IPoker format does NOT support Run It Twice.

 

5. Load up BetOnline / Bodog Poker client and log into your account.

 

6. Once the import folder is properly setup, make sure that the BetOnline Card Catcher says STOP CATCHING (this means it’s grabbing hands from Betonline / Chico network and creating hand histories) on the main interface. If it doesn’t for any reason, then click START CATCHING on the BetOnline Card Catcher.

BetOnline poker

 

That’s it. You may need to click on STOP HUD and START HUD in the holdem manager ACTIVE SESSION screen, but you shouldn’t have to manually attach the table.

Go back to the top

Settings (Section 5)

 

 

 

Settings (Section 5)

If you click on SETTINGS on the BetOnline card catcher, you can change or enable the following settings:

  1. Hero Name – This defaults to the name HERO, but can be changed to any name you’d prefer. This is the name that will save into your hand histories, and the name you’ll have to select in your poker database to see your statistics
    .
  2. Time Zone Offset – If your local time is off in comparison to the BetOnline Server time, you can adjust the hours by which the hand histories are written. Select from the drop down a range of -11 to +13.
    .
  3. Enable Logging – Check this box to turn on advanced logging for debug purposes.
    .
  4. Create Log – Click this button to generate a Log.
    .
  5. Enable PS HUD – Check this box to turn on Pokerstars HUD

Go back to the top

 

If you have any further questions or need any setup assistance, please contact support from this page: https://handconverters.com/support/

 

If you have any further questions or need any setup assistance, please contact support from this page: https://www.acepokersolutions.com/contact-us/